View BFG403W_316323.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DISCRETE SEMICONDUCTORS
BFG403W NPN 17 GHz wideband transistor
Product specification Supersedes data of 1997 Oct 29 File under Discrete Semiconductors, SC14 1998 Mar 11
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
FEATURES * Low current * Very high power gain * Low noise figure * High transition frequency * Very low feedback capacitance. APPLICATIONS * Pager front ends * RF front end * Wideband applications, e.g. analog and digital cellular telephones, cordless telephones (PHS, DECT, etc.) * Radar detectors.
2 1
MSB842
BFG403W
PINNING PIN 1 2 3 4 emitter base emitter collector DESCRIPTION
handbook, halfpage
3
4
DESCRIPTION NPN double polysilicon wideband transistor with buried layer for low voltage applications in a plastic, 4-pin dual-emitter SOT343R package.
Top view
Marking code: P3.
Fig.1 Simplified outline SOT343R.
QUICK REFERENCE DATA SYMBOL VCBO VCEO IC Ptot hFE Cre fT Gmax F PARAMETER collector-base voltage collector-emitter voltage collector current (DC) total power dissipation DC current gain feedback capacitance transition frequency maximum power gain noise figure Ts 140 C IC = 3 mA; VCE = 2 V; Tj = 25 C IC = 0; VCB = 2 V; f = 1 MHz open emitter open base CONDITIONS MIN. - - - - 50 - TYP. - - 3 - 80 20 17 22 1 MAX. 10 4.5 3.6 16 120 - - - - fF GHz dB dB UNIT V V mA mW
IC = 3 mA; VCE = 2 V; f = 2 GHz; Tamb = 25 C - IC = 3 mA; VCE = 2 V; f = 2 GHz; Tamb = 25 C - IC = 1 mA; VCE = 2 V; f = 900 MHz; S = opt CAUTION -
This product is supplied in anti-static packing to prevent damage caused by electrostatic discharge during transport and handling. For further information, refer to Philips specs.: SNW-EQ-608, SNW-FQ-302A and SNW-FQ-302B.
1998 Mar 11
2
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL VCBO VCEO VEBO IC Ptot Tstg Tj Note 1. Ts is the temperature at the soldering point of the emitter pins. THERMAL CHARACTERISTICS SYMBOL Rth j-s PARAMETER thermal resistance from junction to soldering point VALUE 820 PARAMETER collector-base voltage collector-emitter voltage emitter-base voltage collector current (DC) total power dissipation storage temperature operating junction temperature Ts 140 C; note 1; see Fig.2 open base open collector CONDITIONS open emitter - - - - - -65 - MIN.
BFG403W
MAX. 10 4.5 1 3.6 16 +150 150 V V V
UNIT
mA mW C C
UNIT K/W
handbook, halfpage
20
MGD957
Ptot (mW)
10
0 0 40 80 120 Ts (C) 160
Fig.2 Power derating curve.
1998 Mar 11
3
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
CHARACTERISTICS Tj = 25 C unless otherwise specified. SYMBOL V(BR)CBO V(BR)CEO V(BR)EBO ICBO hFE Cc Ce Cre fT Gmax PARAMETER collector-base breakdown voltage emitter-base breakdown voltage collector-base leakage current DC current gain collector capacitance emitter capacitance feedback capacitance transition frequency maximum power gain; note 1 CONDITIONS IC = 2.5 A; IE = 0 IE = 2.5 A; IC = 0 IE = 0; VCB = 4.5 V IC = 3 mA; VCE = 2 V; see Fig.3 IE = ie = 0; VCB = 2 V; f = 1 MHz IC = ic = 0; VEB = 0.5 V; f = 1 MHz IC = 0; VCB = 2 V; f = 1 MHz; see Fig.4 IC = 3 mA; VCE = 2 V; f = 2 GHz; Tamb = 25 C; see Fig.5 MIN. 10 4.5 1 - 50 - - - -
BFG403W
TYP. - - - - 80 170 315 20 17 20 22 5 14 1 1.6 -5 6
MAX. - - - 15 120 - - - - - - - - - - - -
UNIT V V V nA fF fF fF GHz dB dB dB dB dB dB dBm dBm
collector-emitter breakdown voltage IC = 1 mA; IB = 0
IC = 0.5 mA; VCE = 1 V; f = 900 MHz; - Tamb = 25 C; see Figs 6 and 8 IC = 3 mA; VCE = 2 V; f = 2 GHz; Tamb = 25 C; see Figs 7 and 8 -
S 21
2
insertion power gain
IC = 0.5 mA; VCE = 1 V; f = 900 MHz; - Tamb = 25 C; see Fig.8 IC = 3 mA; VCE = 2 V; f = 2 GHz; Tamb = 25 C; see Fig.8 - - - - -
F
noise figure
IC = 1 mA; VCE = 2 V; f = 900 MHz; S = opt; see Fig.13 IC = 1 mA; VCE = 2 V; f = 2 GHz; S = opt; see Fig.13
PL1 ITO Notes
output power at 1 dB gain compression third order intercept point
IC = 1 mA; VCE = 1 V; f = 900 MHz; ZS = ZS opt; ZL = ZL opt; note 2 IC = 1 mA; VCE = 1 V; f = 900 MHz; ZS = ZS opt; ZL = ZL opt; note 2
1. Gmax is the maximum power gain, if K > 1. If K < 1 then Gmax = MSG; see Figs 6, 7 and 8. 2. ZS is optimized for noise; ZL is optimized for gain.
1998 Mar 11
4
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
BFG403W
handbook, halfpage
120
MGG678
handbook, halfpage
50 Cre (fF) 40
MGG679
hFE
80
(1) (2) (3)
30
20 40 10
0 0 (1) VCE = 3 V. (2) VCE = 2 V. (3) VCE = 1 V. 2 4 IC (mA) 6
0 0 1 2 3 4 5 VCB (V)
IC = 0; f = 1 MHz.
Fig.3
DC current gain as a function of collector current; typical values.
Fig.4
Feedback capacitance as a function of collector-base voltage; typical values.
handbook, halfpage
20 fT 16
MGG680
handbook, halfpage
30
MGG709
(GHz)
MSG (dB) 20
12
8 10 4
0 1 IC (mA) 10
0 0 2 4 IC (mA) 6
VCE = 2 V; f = 2 GHz; Tamb = 25 C.
VCE = 2 V; f = 900 MHz.
Fig.5
Transition frequency as a function of collector current; typical values.
Fig.6
Maximum stable gain as a function of collector current; typical values.
1998 Mar 11
5
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
BFG403W
handbook, halfpage
30
MGG710
MGG711
handbook, halfpage
40
MSG (dB) 20
gain (dB) 30 MSG
20
S21
10 10
0 0 2 4 IC (mA) 6
0 10
102
103
f (MHz)
104
VCE = 2 V; f = 2 GHz.
IC = 3 mA; VCE = 2 V.
Fig.7
Maximum stable gain as a function of collector current; typical values.
Fig.8
Gain as a function of frequency; typical values.
handbook, full pagewidth
90 1.0 1 135 0.5 2 45 0.8 0.6 0.4 0.2 180 0 0.2 0.5 1 2 5 40 MHz 0 0
0.2
5
0.2
3 GHz
5
-135
0.5 1
2
-45 1.0
-90 IC = 3 mA; VCE = 2 V; Zo = 50 .
MGG713
Fig.9 Common emitter input reflection coefficient (S11); typical values.
1998 Mar 11
6
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
BFG403W
handbook, full pagewidth
90
135
45
180 25 20 15
40 MHz 10 5
3 GHz 0
-135
-45
-90 IC = 3 mA; VCE = 2 V.
MGG714
Fig.10 Common emitter forward transmission coefficient (S21); typical values.
handbook, full pagewidth
90
135
45
3 GHz
0.05 180
0.04
0.03
0.02
0.01 0 40 MHz
-135
-45
-90 IC = 3 mA; VCE = 2 V.
MGG715
Fig.11 Common emitter reverse transmission coefficient (S12); typical values.
1998 Mar 11
7
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
BFG403W
handbook, full pagewidth
90 1.0 1 135 0.5 2 45 0.8 0.6 0.4 0.2 180 0 0.2 0.5 1 2 5 40 MHz 0 0
0.2
5
0.2 3 GHz
5
-135
0.5 1
2
-45 1.0
-90 IC = 3 mA; VCE = 2 V; Zo = 50 .
MGG716
Fig.12 Common emitter output reflection coefficient (S22); typical values.
Noise data VCE = 2 V; typical values. f (MHz) 900 1 2 3 4 5 2000 0.5 1 2 3 4 5 IC (mA) 0.5 Fmin (dB) 0.9 1.1 1.4 1.6 1.9 2.1 1.8 1.6 1.8 2.1 2.4 2.8 mag 0.91 0.83 0.71 0.62 0.56 0.50 0.71 0.74 0.64 0.56 0.48 0.45 angle 4.7 5.1 5.1 5.0 4.9 4.2 27.5 26.1 26.3 26.1 26.7 25.8 rn () 1.41 1.12 0.97 0.88 0.84 0.82 1.47 1.11 0.93 0.91 0.9 0.85
0 0 2 4 IC (mA) 6 1 2
(2)
handbook, halfpage
3
MGG712
Fmin (dB)
(1)
(1) VCE = 2 V; f = 2 GHz. (2) VCE = 2 V; f = 900 MHz.
Fig.13 Minimum noise figure as a function of the collector current; typical values.
1998 Mar 11
8
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
SPICE parameters for the BFG403W die SEQUENCE No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 (1) 20 22 23 24 25 26 27 28 29 30 31 32 33 34 (1) 35
(1) (1)
BFG403W
PARAMETER IS BF NF VAF IKF ISE NE BR NR VAR IKR ISC NC RB IRB RBM RE RC XTB EG XTI CJE VJE MJE TF XTF VTF ITF PTF CJC VJC MJC XCJC TR CJS VJS MJS FC
VALUE 5.554 145.0 0.993 31.12 35.75 35.35 3.000 11.37 0.985 1.874 0.014 57.08 1.546 122.4 0.000 52.45 1.511 15.12 1.500 1.110 3.000 36.61 900.0 0.346 4.122 68.20 2.004 0.179 0.000 16.21 556.9 0.207 0.500 00.00 78.59 418.3 0.239 0.550 - - V
UNIT aA
SEQUENCE No. 39
(2)(3)
PARAMETER Cbp Rsb1 Rsb2
VALUE 145 25 19
UNIT fF
40 (2) 41 (3) Notes
mA fA - - - V A aA - A - eV - fF mV - ps - V A deg fF mV - - ns fF mV - -
1. These parameters have not been extracted, the default values are shown. 2. Bonding pad capacity Cbp in series with substrate resistance Rsb1 between B and E. 3. Bonding pad capacity Cbp in series with substrate resistance Rsb2 between C and E.
handbook, halfpage
C cb
L1 B B' E' C'
L2 C
C be
Cce
MGD956
21 (1)
L3
E QLB = 50; QLE = 50; QLB,E(f) = QLB,E(f/fc) fc = scaling frequency = 1 GHz.
Fig.14 Package equivalent circuit SOT343R2.
List of components (see Fig.14) DESIGNATION Cbe Ccb Cce L1 L2 L3 (note 1) Note 1. External emitter inductance to be added separately due to the influence of the printed-circuit board. 80 2 80 1.1 1.1 0.25 VALUE fF fF fF nH nH nH UNIT
36 (1) 37 (1) 38
1998 Mar 11
9
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
PACKAGE OUTLINE Plastic surface mounted package; reverse pinning; 4 leads
BFG403W
SOT343R
D
B
E
A
X
y
HE e
vMA
3
4
Q
A A1 c
2
wM B bp e1 b1
1
Lp detail X
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 1.1 0.8 A1 max 0.1 bp 0.4 0.3 b1 0.7 0.5 c 0.25 0.10 D 2.2 1.8 E 1.35 1.15 e 1.3 e1 1.15 HE 2.2 2.0 Lp 0.45 0.15 Q 0.23 0.13 v 0.2 w 0.2 y 0.1
OUTLINE VERSION SOT343R
REFERENCES IEC JEDEC EIAJ
EUROPEAN PROJECTION
ISSUE DATE 97-05-21
1998 Mar 11
10
Philips Semiconductors
Product specification
NPN 17 GHz wideband transistor
DEFINITIONS Data Sheet Status Objective specification Preliminary specification Product specification Limiting values
BFG403W
This data sheet contains target or goal specifications for product development. This data sheet contains preliminary data; supplementary data may be published later. This data sheet contains final product specifications.
Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information Where application information is given, it is advisory and does not form part of the specification. LIFE SUPPORT APPLICATIONS These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting from such improper use or sale.
1998 Mar 11
11
Philips Semiconductors - a worldwide company
Argentina: see South America Australia: 34 Waterloo Road, NORTH RYDE, NSW 2113, Tel. +61 2 9805 4455, Fax. +61 2 9805 4466 Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213, Tel. +43 160 1010, Fax. +43 160 101 1210 Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6, 220050 MINSK, Tel. +375 172 200 733, Fax. +375 172 200 773 Belgium: see The Netherlands Brazil: see South America Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor, 51 James Bourchier Blvd., 1407 SOFIA, Tel. +359 2 689 211, Fax. +359 2 689 102 Canada: PHILIPS SEMICONDUCTORS/COMPONENTS, Tel. +1 800 234 7381 China/Hong Kong: 501 Hong Kong Industrial Technology Centre, 72 Tat Chee Avenue, Kowloon Tong, HONG KONG, Tel. +852 2319 7888, Fax. +852 2319 7700 Colombia: see South America Czech Republic: see Austria Denmark: Prags Boulevard 80, PB 1919, DK-2300 COPENHAGEN S, Tel. +45 32 88 2636, Fax. +45 31 57 0044 Finland: Sinikalliontie 3, FIN-02630 ESPOO, Tel. +358 9 615800, Fax. +358 9 61580920 France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex, Tel. +33 1 40 99 6161, Fax. +33 1 40 99 6427 Germany: Hammerbrookstrae 69, D-20097 HAMBURG, Tel. +49 40 23 53 60, Fax. +49 40 23 536 300 Greece: No. 15, 25th March Street, GR 17778 TAVROS/ATHENS, Tel. +30 1 4894 339/239, Fax. +30 1 4814 240 Hungary: see Austria India: Philips INDIA Ltd, Band Box Building, 2nd floor, 254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025, Tel. +91 22 493 8541, Fax. +91 22 493 0966 Indonesia: see Singapore Ireland: Newstead, Clonskeagh, DUBLIN 14, Tel. +353 1 7640 000, Fax. +353 1 7640 200 Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053, TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007 Italy: PHILIPS SEMICONDUCTORS, Piazza IV Novembre 3, 20124 MILANO, Tel. +39 2 6752 2531, Fax. +39 2 6752 2557 Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku, TOKYO 108, Tel. +81 3 3740 5130, Fax. +81 3 3740 5077 Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL, Tel. +82 2 709 1412, Fax. +82 2 709 1415 Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR, Tel. +60 3 750 5214, Fax. +60 3 757 4880 Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905, Tel. +9-5 800 234 7381 Middle East: see Italy Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB, Tel. +31 40 27 82785, Fax. +31 40 27 88399 New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND, Tel. +64 9 849 4160, Fax. +64 9 849 7811 Norway: Box 1, Manglerud 0612, OSLO, Tel. +47 22 74 8000, Fax. +47 22 74 8341 Philippines: Philips Semiconductors Philippines Inc., 106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI, Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474 Poland: Ul. Lukiska 10, PL 04-123 WARSZAWA, Tel. +48 22 612 2831, Fax. +48 22 612 2327 Portugal: see Spain Romania: see Italy Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW, Tel. +7 095 755 6918, Fax. +7 095 755 6919 Singapore: Lorong 1, Toa Payoh, SINGAPORE 1231, Tel. +65 350 2538, Fax. +65 251 6500 Slovakia: see Austria Slovenia: see Italy South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale, 2092 JOHANNESBURG, P.O. Box 7430 Johannesburg 2000, Tel. +27 11 470 5911, Fax. +27 11 470 5494 South America: Al. Vicente Pinzon, 173, 6th floor, 04547-130 SAO PAULO, SP, Brazil, Tel. +55 11 821 2333, Fax. +55 11 821 2382 Spain: Balmes 22, 08007 BARCELONA, Tel. +34 3 301 6312, Fax. +34 3 301 4107 Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM, Tel. +46 8 632 2000, Fax. +46 8 632 2745 Switzerland: Allmendstrasse 140, CH-8027 ZURICH, Tel. +41 1 488 2686, Fax. +41 1 488 3263 Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1, TAIPEI, Taiwan Tel. +886 2 2134 2865, Fax. +886 2 2134 2874 Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd., 209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260, Tel. +66 2 745 4090, Fax. +66 2 398 0793 Turkey: Talatpasa Cad. No. 5, 80640 GULTEPE/ISTANBUL, Tel. +90 212 279 2770, Fax. +90 212 282 6707 Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7, 252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461 United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes, MIDDLESEX UB3 5BX, Tel. +44 181 730 5000, Fax. +44 181 754 8421 United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409, Tel. +1 800 234 7381 Uruguay: see South America Vietnam: see Singapore Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD, Tel. +381 11 625 344, Fax.+381 11 635 777
For all other countries apply to: Philips Semiconductors, International Marketing & Sales Communications, Building BE-p, P.O. Box 218, 5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825 (c) Philips Electronics N.V. 1998
Internet: http://www.semiconductors.philips.com
SCA57
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights.
Printed in The Netherlands
125104/00/04/pp12
Date of release: 1998 Mar 11
Document order number:
9397 750 03387

▲Up To Search▲

Price & Availability of BFG403W

	To Download BFG403W Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .